DFI image format

From DiscFerret
Revision as of 22:54, 15 January 2012 by Balrog (talk | contribs) (Added comments, thanks fjkraan!)
Jump to: navigation, search


Format originator: DiscFerret software.

Overall format

All integers in this file format are stored in big-endian form.

The DFI file consists of a 4-byte magic string, followed by a series of disc sample blocks.

The magic string is "DFER" for old-style DiscFerret images, or "DFE2" for new-style DiscFerret images.

Each sample block has a header --

uint16_be cylinder;
uint16_be head;
uint16_be sector;
uint32_be data_length;

The cylinder number starts at zero and counts up to the number of cylinders on the disk. The head number follows the same rule (starts at zero, increments for each additional head). The sector number is optional, and only used for hard-sectored discs. For soft-sectored discs, it is set to zero. Data_length indicates the number of bytes of data which follow.

Decoding data

Old-style images

carry = 0
For every byte in the stream:
  if (byte AND 0x7f) == 0x00:
    carry = carry + 127
  else:
    emit((byte AND 0x7f) + carry)
    carry = 0
if carry > 0:
  emit(carry)

New-style images

carry = 0
For every byte in the stream:
  if ((byte AND 0x7f) == 0x7f):    // if lower 7 bit value is 0x7f
    carry = carry + 127
  else if (byte AND 0x80) != 0:    // if high bit set in byte
    carry = carry + (byte & 0x7F)  // add lower 7 bit value to carry
    add_index_position(carry)      // add high bit to carry
  else:                            // here byte < 0x7f
    emit((byte AND 0x7f) + carry)  // ?? the AND 0x7f is superfluous here. report carry + byte
    carry = 0                      // reset carry
if carry > 0:                      // 
  emit(carry)                      // report carry

// emit() looks like a written value
// add_index_position() is just setting the high bit of the last data value 
//